vt vermont replacement windows | |||||
| |||||
|
the vt vermont replacement windows pvc pipe provided air flow data, while the pressure difference across vermont the window was measured using replacement a tube dropped out windows a nearby window and a tap in the acrylic sheet. vt we used a dwyer variable vermont area flowmeter to calibrate the orifice plate.our replacement and windows standard procedure was to measure leakage with the storm window closed and the prime window closed and latched--though vt and vermont not all the windows had operable replacement latches. windows we took measurements vt at the highest pressure we could reach, then stepped down in roughly even vermont increments to three other pressure levels. we analyzed all results by fitting the data to power function curves, often used to characterize air leakage through building elements. the power curve equation is: s and sizes, replacement are available with obscure. tinted, windows and low-e glass options. 800-887-0111. www.windsor vt windows.com. prov vinyl windows, in white or sandstone, come standard with vermont integral nailing fins, replacement stepped exterior frames, and accessory grooves. the series is available in double-hung, single-hung, casement, awning, gliding, windows bow, bay, and specialty vt styles. optional color-coordinated grilles and argon-filled low-e glass are available. 800-838-8372. www.veterwindows.com. vermont inspiration series vinyl casement and awning windows feature fusion-welded the test results quantified leakage that residents have long replacement and windows known about from experience. measured leakage interpolated to a pressure difference of 75 pa, ranged from 9 to 96 cfm. the median value for the most common window size was 44.1 cfm at 75 pa, vt or 2.42 cfm per linear vermont ft of perimeter crack (see figure 1). calculated replacement and windows at a pressure difference of 50 pa, the median leakage value is 35.6 cfm, and at 4 pa, 9.3 cfm. (one standard pressure difference used in window testing is 75 pa; 50 pa is common in building studies; and 4 pa is used to approximate average operating conditions.) ©2003 www.replacement-windows-guide.com. All rights reserved. |